Trigger:delay:trigger:slope - Agilent Technologies Infiniium 90000 Series Programmer's Manual

33
Trigger Commands

:TRIGger:DELay:TRIGger:SLOPe

Command
:TRIGger:DELay:TRIGger:SLOPe {NEGative | POSitive}
This command sets the trigger slope for the Delay trigger event.
Query
:TRIGger:DELay:TRIGger:SLOPe?
The query returns the currently defined slope for an event in the Delay
trigger mode.
Returned Format
[:TRIGger:DELay:TRIGger:SLOPe]
862
{NEGative | POSitive}<NL>
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference