Sprocessing:dfequalizer:tap:gain - Agilent Technologies Infiniium 90000 Series Programmer's Manual

30
Serial Data Equalization Commands

:SPRocessing:DFEQualizer:TAP:GAIN

Command
:SPRocessing:DFEQualizer:TAP:GAIN <gain>
The eye diagram drawn after DFE is applied is attenuated. To amplify the
eye back to its original size (so you can directly compare the eye at the
receiver to the eye at the transmitter), a gain factor needs to be applied.
The :DFEQualizer:TAP:GAIN command allows you to set this gain. For
more information on this parameter, refer to the N5461A Infiniium Seriald
Data Equalization User's Guide.
<gain>
A real number
Example This example sets the gain to 3.23.
myScope.WriteString ":SPRocessing:DFEQualizer:TAP:GAIN 3.23"
Query

:SPRocessing:DFEQualizer:TAP:GAIN?

The :SPRocessing:DFEQualizer:TAP:GAIN? query returns the current gain
value.
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 783