Bus<N>:Readout - Agilent Technologies Infiniium 90000 Series Programmer's Manual

10
Bus Commands
:BUS<N>:READout
Command
:BUS<N>:READout {NONE | BINary | DECimal | HEX | OCTal | SIGNed | SYMBol
The BUS commands only apply to the MSO oscilloscopes.
N O T E
The :BUS<N>:READout command changes the format of the numbers
displayed in the bus waveform.
<N>
An integer, 1- 4.
Example
This example sets the bus read out to decimal.
myScope.WriteString ":BUS1:READOUT DECIMAL"
Query
:BUS<N>:READout?
The :BUS<N>:READout? query returns the format of the readout control.
Returned Format
[:BUS<N>:READout] {NONE | BINary | DECimal | HEX | OCTal | SIGNed | SYMB
ol}<NL>
184 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference