Setting Up - Agilent Technologies Infiniium 90000 Series Programmer's Manual

Agilent Infiniium 90000 Series Oscilloscopes
Programmer's Reference
2

Setting Up

Step 1. Install Agilent IO Libraries Suite software
Step 2. Connect and set up the oscilloscope
Step 3. Verify the oscilloscope connection
This chapter explains how to install the Agilent IO Libraries Suite
software on a controller PC, connect the oscilloscope to the controller PC,
set up the oscilloscope, and verify the oscilloscope connection.
Note that Agilent IO Libraries Suite software comes installed on Infiniium
oscilloscopes, and it is possible to control the oscilloscope from programs
running on the instrument.
s1
44
45
46
43