Trigger:hysteresis - Agilent Technologies Infiniium 90000 Series Programmer's Manual

33
Trigger Commands

:TRIGger:HYSTeresis

Command
:TRIGger:HYSTeresis {NORMal | HSENsitivity}
The :TRIGger:HYSTeresis command specifies the trigger hysteresis (noise
reject) as either normal or high sensitivity. NORMal sensitivity adds
hysteresis to the trigger circuitry for rejecting noise and should be used
for waveforms of 4 GHz or below. HSENsitivity lowers the hysteresis of the
trigger circuitry and should be used for waveforms of 4 GHz and above.
Query
:TRIGger:HYSTeresis?
The query returns the current hysteresis setting.
Returned Format
[:TRIGger:HYSTeresis] {NORMal | HSENsitivity}<NL>
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 841