Trigger:glitch:width - Agilent Technologies Infiniium 90000 Series Programmer's Manual

33
Trigger Commands

:TRIGger:GLITch:WIDTh

Command
:TRIGger:GLITch[{1 | 2}]:WIDTh <width>
This command sets the glitch width. The oscilloscope will trigger on a
pulse that has a width less than the specified width.
The optional [{1 | 2}] parameter sets whether the trigger mode goes with
the TERM1 or TERM2 state if sequential triggering is being used.
<width>
A real number for the glitch width, ranging from 250 ps to 10 s.
Query
:TRIGger:GLITch:WIDTh?
The query returns the currently specified glitch width.
Returned Format
[:TRIGger:GLITch:WIDTh] <width><NL>
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 869