:MEASure:TIEFilter:STOP
Command
:MEASure:TIEFilter:STOP <stop_frequency>
The :MEASure:TIEFilter:STOP command sets the stopping frequency for the
TIE filter.
<stop_
A real number.
frequency>
Query
:MEASure:TIEFilter:STOP?
The :MEASure:TIEFilter:STOP? query returns the current value of the
stopping frequency of the TIE filter.
Returned Format
[:MEASure:TIEFilter:STOP] <value><NL>
<value>
The stop frequency for the TIE filter.
Example
This example returns the current value of the stopping frequency for the
TIE filter then prints the contents of the variable to the computer's screen.
myScope.WriteString ":SYSTem:HEADer OFF"
myScope.WriteString ":MEASure:TIEFilter:STOP?"
varStop = myScope.ReadNumber
Debug.Print FormatNumber(varStop, 0)
See Also
•
•
•
•
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
":MEASure:TIEFilter:STATe"
":MEASure:TIEFilter:TYPE"
":MEASure:TIEFilter:SHAPe"
":MEASure:TIEFilter:STARt"
' Response headers off.
on page 662
on page 664
on page 660
on page 661
25
Measure Commands
663