Pder - Agilent Technologies Infiniium 90000 Series Programmer's Manual

27
Root Level Commands

:PDER?

(Processing Done Event Register)
Query
:PDER?
The :PDER? query reads the Processing Done Event Register and returns 1
or 0. After the Processing Done Event Register is read, the register is
cleared. The returned value 1 indicates indicates that all math and
measurements are complete and 0 indicates they are not complete. :PDER?
is non- blocking.
:PDER? can be used in place of :ADER?.
Returned Format
{1 | 0}<NL>
724 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference