Trigger:window:tpoint - Agilent Technologies Infiniium 90000 Series Programmer's Manual

33
Trigger Commands

:TRIGger:WINDow:TPOint

Command
:TRIGger:WINDow[{1 | 2}]:TPOint {BOUNdary | TIMeout}
This command specifies whether the window trigger should occur at the
boundary of the window or at a specified timeout period.
The optional [{1 | 2}] parameter sets whether the trigger mode goes with
the TERM1 or TERM2 state if sequential triggering is being used.
Query
:TRIGger:WINDow:TPOint?
The query returns the currently defined trigger on point for the pulse
width trigger.
Returned Format
[:TRIGger:PWIDth:TPOint] {BOUNdary | TIMeout}<NL>
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 929