Trigger:level - Agilent Technologies Infiniium 90000 Series Programmer's Manual

33
Trigger Commands

:TRIGger:LEVel

Command
:TRIGger:LEVel {{CHANnel<N> | AUX},<level>}}
The :TRIGger:LEVel command specifies the trigger level on the specified
channel for the trigger source. Only one trigger level is stored in the
oscilloscope for each channel. This level applies to the channel throughout
the trigger dialog.
<N> An integer, 1- 4.
<level> A real number for the trigger level on the specified channel or Auxiliary
Trigger Input.
Query
:TRIGger:LEVel? {CHANnel<N> | AUX}
The query returns the specified channel's trigger level.
Returned Format
[:TRIGger:LEVel {CHANnel<N> | AUX},] <level><NL>
842 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference