Sprocessing:dfequalizer:tap:utarget - Agilent Technologies Infiniium 90000 Series Programmer's Manual

30
Serial Data Equalization Commands

:SPRocessing:DFEQualizer:TAP:UTARget

Command
:SPRocessing:DFEQualizer:TAP:UTARget <upper_target>
The Upper Target field dictates the logical high value used in the DFE
algorithm. For example, in DFE, when a bit is determined to be a logical
high, its value will be equal to Upper Target. The
:DFEQualizer:TAP:UTARget command allows you to set this value.
<upper_target> A real number
Example This example sets the Upper Target to 1.0.
myScope.WriteString ":SPRocessing:DFEQualizer:TAP:UTARget 1.0"
Query

:SPRocessing:DFEQualizer:TAP:UTARget?

The :SPRocessing:DFEQualizer:TAP:UTARget? query returns the current
value for the Upper Target field.
784 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference