Cdisplay - Agilent Technologies Infiniium 90000 Series Programmer's Manual

27
Root Level Commands

:CDISplay

Command
:CDISplay
The :CDISplay command clears the display and resets all associated
measurements. If the oscilloscope is stopped, all currently displayed data
is erased. If the oscilloscope is running, all of the data in active channels
and functions is erased; however, new data is displayed on the next
acquisition. Waveform memories are not erased.
Example This example clears the oscilloscope display.
myScope.WriteString ":CDISPLAY"
714 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference