Trigger:shold:dsource - Agilent Technologies Infiniium 90000 Series Programmer's Manual

33
Trigger Commands

:TRIGger:SHOLd:DSOurce

Command
:TRIGger:SHOLd[{1 | 2}]:DSOurce CHANnel<N>
The data source commands specify the data source for the trigger setup
and hold violation.
The optional [{1 | 2}] parameter sets whether the trigger mode goes with
the TERM1 or TERM2 state if sequential triggering is being used.
<N>
An integer, 1- 4.
Query
:TRIGger:SHOLd:DSOurce?
The query returns the currently defined data source for the trigger setup
and hold violation.
Returned Format
[:TRIGger:SHOLd:DSOurce] CHANnel<N><NL>
896 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference