30
Serial Data Equalization Commands
:SPRocessing:FFEQualizer:TAP:BANDwidth
Command
:SPRocessing:FFEQualizer:TAP:BANDwidth <bandwidth>
The :FFEQualizer:TAP:BANDwidth command is only needed if the
FFEQualizer:TAP:BWMode command is set to CUSTom and in this case it
sets the bandwidth at which the response generated by equalization rolls
off. To understand more about this parameter, consult the N5461A
Infiniium Serial Data Equalization User's Guide.
<bandwidth>
The bandwidth at which the response generated by equalization rolls off.
Query
:SPRocessing:FFEQualizer:TAP:BANDwidth?
The :SPRocessing:FFEQualizer:TAP:BANDwidth? query returns the current
value for the BANDwidth parameter.
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
797