Trigger:delay:arm:slope - Agilent Technologies Infiniium 90000 Series Programmer's Manual

33
Trigger Commands

:TRIGger:DELay:ARM:SLOPe

Command
:TRIGger:DELay:ARM:SLOPe {NEGative | POSitive}
This command sets a positive or negative slope for arming the trigger
circuitry when the oscilloscope is in the Delay trigger mode.
Query
:TRIGger:DELay:ARM:SLOPe?
The query returns the currently defined slope for the Delay trigger mode.
Returned Format
[:TRIGger:DELay:ARM:SLOPe] {NEGative | POSitive}<NL>
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 855