Agilent Technologies Infiniium 90000 Series Programmer's Manual page 597

25
Measure Commands
<result_state> If SENDvalid is ON, the result state is returned with the measurement
result. See the :MEASure:RESults table in this chapter for a list of the
result states.
Example This example places the current value of overshoot in the numeric
variable, varValue, then prints the contents of the variable to the
computer's screen.
myScope.WriteString ":SYSTEM:HEADER OFF" ' Response headers off.
myScope.WriteString ":MEASURE:OVERSHOOT? CHANNEL1"
varValue = myScope.ReadNumber
Debug.Print FormatNumber(varValue, 0)
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 597