Trigger:holdoff - Agilent Technologies Infiniium 90000 Series Programmer's Manual

33
Trigger Commands

:TRIGger:HOLDoff

Command
:TRIGger:HOLDoff <holdoff_time>
The :TRIGger:HOLDoff command specifies the amount of time the
oscilloscope should wait after receiving a trigger before enabling the
trigger again.
<holdoff_time>
A real number for the holdoff time, ranging from 80 ns to 10 s.
Query
:TRIGger:HOLDoff?
The query returns the current holdoff value for the current mode.
Returned Format
[:TRIGger:HOLDoff] <holdoff><NL>
836 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference