Opee - Agilent Technologies Infiniium 90000 Series Programmer's Manual

27
Root Level Commands

:OPEE

(Operation Status Enable)
Command
:OPEE <mask>
<mask>
The decimal weight of the enabled bits.
The :OPEE command sets a mask in the Operation Status Enable register.
Each bit that is set to a "1" enables that bit to set bit 7 in the status byte
register, and potentially causes an SRQ to be generated. Bit 5, Wait for
Trig is used. Other bits are reserved.
Query
:OPEE?
The query returns the current value contained in the Operation Status
Enable register as a decimal number.
Returned Format
[OPEE] <value><NL>
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 721