View - Agilent Technologies Infiniium 90000 Series Programmer's Manual

27
Root Level Commands

:VIEW

Command
:VIEW {CHANnel<N> | FUNCtion<F> | HISTogram | WMEMory<N> | MSTrend
The :VIEW command turns on a channel, function, histogram, or waveform
memory. The :BLANk command turns them off.
MTRend and MSPectrum sources are only available if the oscilloscope has
the EZJIT option installed and the feature is enabled.
<N>
An integer, 1- 4.
<F>
An integer, 1- 16.
<M> An integer, 0- 15.
Example
This example turns on channel 1.
myScope.WriteString ":VIEW CHANnel1"
See Also
•
736
| MSPectrum | BUS<N> | DIGital<M> | POD<P>}
":BLANk" on page 713
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference