Sprocessing:dfequalizer:state - Agilent Technologies Infiniium 90000 Series Programmer's Manual

30
Serial Data Equalization Commands

:SPRocessing:DFEQualizer:STATe

Command
:SPRocessing:DFEQualizer:STATe {(OFF | 0) | (ON | 1)}
The :DFEQualizer:STATe command turns the Decision Feedback
Equalization on or off.
Example This example turns on DFE.
myScope.WriteString ":SPRocessing:DFEQualizer:STATe ON"
Query

:SPRocessing:DFEQualizer:STATe?

The :SPRocessing:DFEQualizer:STATe? query returns whether or not DFE
is turned on.
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 775