Trigger:delay:trigger:source - Agilent Technologies Infiniium 90000 Series Programmer's Manual

33
Trigger Commands

:TRIGger:DELay:TRIGger:SOURce

Command
:TRIGger:DELay:TRIGger:SOURce {CHANnel<N> | DIGital<M>}
This command sets the Trigger On source for a Delay trigger event.
<N>
An integer, 1- 4.
<M> An integer, 0- 15. Digital channels are available on mixed- signal
oscilloscopes.
Query
:TRIGger:DELay:TRIGger:SOURce?
The query returns the currently defined Trigger On source in the Delay
trigger mode.
Returned Format
[:TRIGger:DELay:TRIGger:SOURce] {CHANnel<N> | DIGital<M>}<NL>
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 861