Sbus<N>[:Display] - Agilent Technologies Infiniium 90000 Series Programmer's Manual

28
Serial Bus Commands
:SBUS<N>[:DISPlay]
Command
:SBUS<N>[:DISPlay] <display>
<display> ::= {{1 | ON} | {0 | OFF}}
The :SBUS<N>[:DISPlay] command turns displaying of the serial decode
bus on or off.
This command is only valid when a serial decode option has been licensed.
N O T E
Query
:SBUS<N>[:DISPlay]?
The :SBUS<N>[:DISPlay]? query returns the current display setting of the
serial decode bus.
Returned Format
[:SBUS<N>[:DISPlay]] <display><NL>
<display> ::= {0 | 1}
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 739