Agilent Technologies Infiniium 90000 Series Programmer's Manual page 175

The :BUS:B<N>:TYPE command applies to oscilloscopes with the serial data analysis
N O T E
option installed. The other :BUS<N> commands apply to mixed-signal oscilloscopes
(MSOs).
Agilent Infiniium 90000 Series Oscilloscopes
Programmer's Reference
10
Bus Commands
:BUS:B<N>:TYPE 176
:BUS<N>:BIT<M> 177
:BUS<N>:BITS 178
:BUS<N>:CLEar 179
:BUS<N>:CLOCk 180
:BUS<N>:CLOCk:SLOPe
:BUS<N>:DISPlay 182
:BUS<N>:LABel 183
:BUS<N>:READout 184
s1
181
175