Agilent Technologies Infiniium 90000 Series Programmer's Manual page 969

Table 28 Waveform Preamble Elements (continued)
Element
Acquisition Mode
Complete
X Units
Y Units
Band Pass
See Also
•
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
Description
The acquisition sampling mode of the waveform. (See
on page 157.)
The complete value is the percent of time buckets that are complete. The
complete value is ignored when it is sent to the oscilloscope in the
preamble. (See the
The X-axis units of the waveform. (See the
page 984 query.)
The Y-axis units of the waveform. (See the
page 990 query.)
The band pass consists of two values that are estimates of the
maximum and minimum bandwidth limits of the source waveform. The
bandwidth limit is computed as a function of the selected coupling and
filter mode. (See the
":WAVeform:DATA?" on page 939
Waveform Commands
":WAVeform:COMPlete?" on page 936 query.)
":WAVeform:XUNits?"
":WAVeform:YUNits?"
":WAVeform:BANDpass?"
34
":ACQuire:MODE"
on
on
on page 934 query.)
969