Autoscale:channels - Agilent Technologies Infiniium 90000 Series Programmer's Manual

27
Root Level Commands

:AUToscale:CHANnels

Command
:AUToscale:CHANnels {ALL | DISPlayed}
The :AUToscale:CHANnels command selects whether to apply autoscale to
all of the input channels or just the input channels that are currently
displayed.
Example
This example automatically scales only the displayed channels.
myScope.WriteString ":AUTOSCALE:CHANnels DISPlayed"
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 709