Sbus<N>:Iic:source:clock - Agilent Technologies Infiniium 90000 Series Programmer's Manual

28
Serial Bus Commands
:SBUS<N>:IIC:SOURce:CLOCk
Command
:SBUS<N>:IIC:SOURce:CLOCk <source>
<source> ::= {CHANnel<N> | FUNCtion<F> | WMEMory<N> | DIGital<M>}
The :SBUS<N>:IIC:SOURce:CLOCk command sets the source for the IIC
serial clock (SCL).
<N>
CHANnel<N> is an integer, 1- 4.
WMEMory<N> is an integer, 1- 4.
<F> FUNCtion<F> is an integer, 1- 16.
<M>
An integer, 0- 15. Digital channels are available on mixed- signal
oscilloscopes.
Example This example selects channel 2 as the source for IIC serial clock.
myScope.WriteString ":SBUS1:IIC:SOURce:CLOCk CHANnel2"
Query
:SBUS<N>:IIC:SOURce:CLOCk?
The :SBUS<N>:IIC:SOURce:CLOCk? query returns the current source for
the IIC serial clock.
Returned Format
[:SBUS<N>:IIC:SOURce:CLOCk] <source><NL>
See Also • ":SBUS<N>:IIC:SOURce:DATA" on page 744
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 743