Agilent Technologies Infiniium 90000 Series Programmer's Manual page 615

Table 24 Result States (continued)
Code
36
39
40
41
42
43
45
46
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
Description
Result invalid. Awaiting completion of averaging.
Result invalid. Need jitter package to make this measurement or must be
in jitter mode to make this measurement.
Current measurement is not on screen.
Not enough points available to recover the clock.
The loop bandwidth of the PLL is too high to recover the clock.
RJDJ pattern not found in data.
Clock recovery mode is not permitted.
Too much jitter to make a RJDJ separation.
25
Measure Commands
615