Optional Management Feature - Fabric Manager; Displaying The Optional Feature Licenses; Running Basic Switch Operations Using Telnet; Logging Into The San Switch 2/32 - HP StorageWorks SAN Switch 2/32 Installation Manual

Optional Management Feature – Fabric Manager
Fabric Manager provides a GUI that allows the administrator to monitor and manage
an entire fabric from a standard workstation. Use Fabric Manager to manage fabrics
containing integrated fabrics, in addition to individual switches. Contact your HP
Sales Representative for purchasing information.

Displaying the Optional Feature Licenses

Use these steps to display optional features installed on your switch.
1. Login to the switch as the admin user.
2. At the command line enter the following command:
licenseShow
This command displays the license keys that have been entered for the switch and
the features enabled by those licenses.

Running Basic Switch Operations Using Telnet

Read the following sections to run common switch operations via telnet.

Logging into the SAN Switch 2/32

Use these steps to log into the SAN Switch 2/32.
1. Open a telnet connection to the switch. The login prompt is displayed if the telnet
connection successfully found the switch in the network.
NOTE: The switch must be connected to your IP network through the RS-232 port to enable
connection through telnet.
2. At the login prompt, enter the user ID you are logging in as. For example:
login: admin
The password prompt is displayed if the user exists.
3. Enter the password for the user:
password: xxxxxx
The default password is password.
SAN switch 2/32 version 4.0.x installation guide
Managing the SAN Switch 2/32
3–9 3–9