Display Cluster Base-Members - 3Com Switch 4500 Family Manual

Parameters
mac-address: MAC address of the device to be added to the blacklist. The format is H-H-H, for example,
000f-e298-e001.
all: Deletes all MAC address in the current cluster blacklist.
Description
Use the black-list add-mac command to add the specified MAC address to the cluster blacklist, so that
the device with the specified MAC address cannot join the cluster.
Use the black-list delete-mac command to remove all the MAC addresses or the specified MAC
address from the current cluster blacklist, so that all devices or the device with the specified MAC
address can join the cluster.
By default, no MAC address is added to the cluster blacklist.
You can only use this command on the cluster administrative device.
If the device to be added to the blacklist is a member of the cluster, the execution of the black-list
add-mac command will remove the device from the cluster and then add it to the cluster blacklist. In this
case, the black-list add-mac command is equivalent to the delete-member member-id to-black-list
command.
Examples
# Add the device with the MAC address 0010-3500-e001 to the blacklist.
<aaa_0.Sysname> system-view
Enter system view, return to user view with Ctrl+Z.
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] black-list add-mac 0010-3500-e001
# Delete all addresses in the current cluster blacklist.
[aaa_0.Sysname-cluster] black-list delete-mac all

display cluster base-members

Syntax
display cluster base-members
View
Any view
Parameters
None
1-46