Command Groups; Introduction - Dell PowerConnect 6224 Command Line Interface Manual

Command Groups

Introduction

The Command Line Interface (CLI) is a network management application
operated through an ASCII terminal without the use of a Graphic User
Interface (GUI) driven software application. By directly entering commands,
the user has greater configuration flexibility. The CLI is a basic command-line
interpreter similar to the UNIX C shell.
A switch can be configured and maintained by entering commands from the
CLI, which is based solely on textual input and output with commands being
entered by a terminal keyboard and the output displayed as text via a terminal
monitor. The CLI can be accessed from a console terminal connected to an
EIA/TIA-232 port or through a Telnet session.
This guide describes how the CLI is structured, describes the command
syntax, and describes the command functionality.
This guide also provides information for configuring the PowerConnect
switch, details the procedures, and provides configuration examples. Basic
installation configuration is described in the
completed before using this document.
Command Groups
The system commands can be broken down into three sets of functional
groups, Layers 2, Layer 3, and Utility.
Table 1-1. System Command Groups
Command Group
Layer 2 Commands
AAA
ACL
Description
Configures connection security including authorization
and passwords.
Configures and displays ACL information.
User's Guide
and must be
Command Groups
1
55