Monitoring The Qos Configuration Of Atm Interfaces - Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010 Configuration Manual

Table 48: show qos-profile Output Fields (continued)
Related Topics

Monitoring the QoS Configuration of ATM Interfaces

Display ATM port queuing mode and QoS shaping mode status for a specific ATM
Purpose
interface.
To display the QoS configuration on an ATM interface:
Action
host1# show interfaces atm 2/0
ATM Interface 2/0 is up, line protocol is disabled
AAL5 operational status:
ATM operational status:
.
.
.....
InPackets:
InBytes:
InCells:
OutPackets:
OutBytes:
OutCells:
InErrors:
OutErrors:
InPacketDiscards: 0
InByteDiscards:
InCellErrors:
Administrative qos-shaping-mode: frame
Operational qos-shaping-mode: frame
Administrative qos-mode-port: none
Operational qos-mode-port: none
Attached QoS profile: shaping
Table 49 on page 344 lists the related show interfaces atm command output fields.
Meaning
Field Name
DCM Profile attachments
Interface attachments
Not attached
Configuring a QoS Profile on page 132
Attaching a QoS Profile to an Interface on page 134
Creating Parameter Instances
show qos-profile
time since last status change: 01:08:32
time since last status change: 01:08:32
0
0
0
7803262
7803262000
163868502
0
0
0
0
Chapter 31: Monitoring QoS on E Series Routers
Field Description
Number of QoS profiles attached to profiles for
Service Manager
Number of QoS profiles attached to interfaces
Number of QoS profiles that are unattached
up
up
Monitoring the QoS Configuration of ATM Interfaces
343