Table of Contents
Advertisement
CHAPTER 3 Media Flow Manager Web-Based Interface
Optional Security Configuration
Set authentication parameters for configured Matching URL Hosts.
See
Figure
•
Matching URL Host—Pick a configured host from the drop-down list.
•
Hash Verify's Shared Secret—Enter the shared secret needed for authentication.
•
Allowed Time Deviation— Allowed deviation of current time from the request timestamp.
Default value is 10 seconds.
•
Cache Age Response—Allows the Service Director to set a maximum age in the HTTP
response it sends, to allow the browser to cache. The default value is 1 day (86400
seconds). A value of 0 indicates that the response should be made non-cacheable.
Click Add to complete the security configuration and Save at the top of the page to make
changes persistent across reboots.
Figure 76
Service Director > Configure Page Detail (Optional Security Configuration)
Match to Response Configuration
For each configured host (choose from drop-down list), set a match type and either a
configured Preset XML Response file (choose from drop-down list), or up to three hosts, to
handle the response. See
•
Matching URL Host—Pick a configured host from the drop-down list.
•
Match Type and Match String—Choose a type from the drop-down list and enter a value
for it, then choose a response; either Preset XML Response or Host to Respond (next).
•
Preset XML Response and Preset XML Response Reference Name—Select the radio-
button and choose a configured file reference name from the drop-down list.
•
Host to Respond and Host 1, Host 2, and Host 3—Select the radio-button and enter up
to three hostnames.
Click Add to complete the Match to Response configuration and Save at the top of the page to
make changes persistent across reboots.
84
Service Director
76, below, for graphic.
Figure
77, next, for graphic.
Media Flow Manager Administrator's Guide
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
