Table 69: Show Mirror Log Output Fields; Monitoring Snmp Secure Packet Mirroring Traps - Juniper POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X Configuration Manual

Table 69 on page 275 lists the show mirror log command output fields.
Meaning

Table 69: show mirror log Output Fields

Related Topics

Monitoring SNMP Secure Packet Mirroring Traps

Display configuration information about SNMP traps and trap destinations. The
Purpose
PacketMirror trap category is displayed only when the mirror enable command has
been configured. The Secure Trap Logging status is displayed only when the mirror
enable command has been issued and secure audit logs have been configured.Text
in bold indicates secure packet mirroring trap configuration information.
To display secure packet mirroring traps:
Action
host1# show snmp trap
Enabled Categories: CliSecurity,
SNMP authentication failure trap is disabled
Trap Source: FastEthernet 6/0, Trap Source Address:192.168.120.78
Trap Proxy: enabled
Secure Trap Logging is enabled
Global Trap Severity Level: 6 - informational
Address Security String
--------------- --------------------------------
10.1.1.1 host1
10.12.12.12 secureHost
192.168.57.162 host2
Address TrapSeverityFilter
--------------- ------------------ ------- --------- --------- -------------
10.1.1.1 5 - notice
10.12.12.12 2 - critical
192.168.57.162 2 - critical
Field Name
Time
Mirror-ID
Session-ID
User
Error Status
clear mirror log
show mirror log
PacketMirror , Sonet
Ping Maximum
TimeOut QueueSize DrainRate discrd methd
1 32
1 32
1 32
Chapter 14: Monitoring Packet Mirroring
Field Description
Day, date, and time of failure
Unique identifier of the mirrored
session
Unique identifier of the user session
User login name
Description of the error condition
Ver Port Trap Categories
--- ----- ----------------
v1 162 Cli
v3 162 CliOspf PacketMirror Sonet
v3 162 Sonet
Queue Queue Full
0 dropLastIn
0 dropLastIn
0 dropLastIn
Monitoring SNMP Secure Packet Mirroring Traps
275