Table of Contents
Advertisement
Configuring SNMP Health Monitoring (NSM Procedure)
Table 73: Configuring Health Monitor Fields
Option
Comment
Interval
120
You can use SNMP health monitoring to minimize user configuration requirements. Health
monitoring is a notification system that extends the RMON alarm infrastructure to provide
predefined monitoring for a selected set of object instances (for file system usage, CPU
usage, and memory usage) and includes support for unknown or dynamic object instances
(such as JUNOS Software processes).
To configure health monitoring for SNMP in NSM:
In the navigation tree, select Device Manager > Devices.
1.
In the Devices list, double-click the device to select it.
2.
Click the Configuration tab.
3.
In the configuration tree, expand SNMP.
4.
Select Health Monitor.
5.
Select the Enable Feature check box.
6.
Enter the parameters as specified in Table 73 on page 120.
7.
Click one:
8.
OK—To save the changes.
Cancel—To cancel the modifications.
Apply—To apply the SNMP settings.
NOTE: After you make changes to a device configuration, you must push that
updated device configuration to the physical security device for those changes
to take effect. You can update multiple devices at one time. See the Updating
Devices section in the Network and Security Manager Administration Guide for
more information.
Function
Specifies the comment for the health
monitoring configuration.
Specifies the interval. The interval
represents the period of time, in seconds,
over which the object instance is
sampled. The sample value is then
compared with the rising and falling
threshold values.
Your Action
Enter a comment.
Specify the interval between samples,
in seconds. You can enter a value from
1 through 2147483647. The default is
300.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
