Monitoring Snmp Secure Packet Mirroring Traps; Table 69: Show Mirror Log Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual

Related
Documentation

Monitoring SNMP Secure Packet Mirroring Traps

Purpose
Action
host1# show snmp trap
Enabled Categories: CliSecurity,
SNMP authentication failure trap is disabled
Trap Source: FastEthernet 6/0, Trap Source Address:192.168.120.78
Trap Proxy: enabled
Secure Trap Logging is enabled
Global Trap Severity Level: 6 - informational
Address Security String
--------------- --------------------------------
10.1.1.1 host1
10.12.12.12 secureHost
192.168.57.162 host2
Address TrapSeverityFilter
--------------- ------------------ ------- --------- --------- -------------
10.1.1.1 5 - notice
10.12.12.12 2 - critical
192.168.57.162 2 - critical
Meaning
Copyright © 2010, Juniper Networks, Inc.

Table 69: show mirror log Output Fields

Field Name
Time
Mirror-ID
Session-ID
User
Error Status
clear mirror log
show mirror log
Display configuration information about SNMP traps and trap destinations. The
PacketMirror trap category is displayed only when the mirror enable command has been
configured. The Secure Trap Logging status is displayed only when the mirror enable
command has been issued and secure audit logs have been configured.Text in bold
indicates secure packet mirroring trap configuration information.
To display secure packet mirroring traps:
PacketMirror , Sonet
Ping Maximum
TimeOut QueueSize DrainRate discrd methd
1 32
1 32
1 32
Table 70 on page 270 lists the show snmp trap command output fields.
Field Description
Day, date, and time of failure
Unique identifier of the mirrored
session
Unique identifier of the user session
User login name
Description of the error condition
Ver Port Trap Categories
--- ----- ----------------
v1 162 Cli
v3 162 CliOspf PacketMirror Sonet
v3 162 Sonet
Queue Queue Full
0 dropLastIn
0 dropLastIn
0 dropLastIn
Chapter 14: Monitoring Packet Mirroring
269