QuadTech Guardian 6100 Plus Instruction Manual page 9

Dielectric Strength
AC Output Voltage:
Voltage Display:
AC Current Display:
DC Output Voltage:
Voltage Display:
DC Current Display:
The accuracy of the current reading is a function of counts in the least significant digit displayed. The
magnitude of a count is determined by the current measurement range which is a function of the
DC Hipot:
Programmed High Limit Current
Programmed High Limit Current
Programmed High Limit Current
AC Hipot:
Programmed High Limit Current
Programmed High Limit Current
Leakage Current & Power Consumption
Input Voltage:
Line Voltage Meter:
Line Current Meter: 0.1 – 20A, ± (1.5% of reading + 0.1)
Power:
High & Low Limits:
Current Display:
Current Trip Limits: 0.1µA to 10mA, 1µA Resolution (Range Dependent)
Measuring Circuit:
Measurement Modes: Normal, Reverse, Single Fault with GND ON/OFF, Earth Line
www.valuetronics.com
Specifications
Range: 0.5 to 5kV AC, in 1V steps
± (1% of setting +5V)
Regulation:
Frequency: 50-600Hz, in 10Hz increments
± (1% of reading +5V)
Accuracy:
Resolution: 1V steps
Range: 1µA to 40mA AC, in 1µA or 10µA steps
± (1% of reading + 5 counts)
Accuracy:
Range: 0.5 to 6kV DC, in 1V steps
± (1% of reading +5V)
Accuracy:
Resolution: 1V steps
Range: 0.1µA to 0.299mA DC, in 0.1µA steps
0.3mA to 2.99mA DC, in 1µA steps
3mA to 12mA DC, in 10µA steps
± (1% of reading + 5 counts)
Accuracy:
NOTE:
programmed high limit.
> 3.00mA
.300 < 3.00mA
< .300mA
> 3.00mA
< 3.00mA
0 - 300V AC, 50/60Hz
0 - 300V AC, ± (1% of reading + 6cnts)
0 – 4400VA
Programmable for Voltage, Current, Power or AC Source
Range Resolution
0.001-0.59mA 0.0002mA
0.6 - 10mA 0.003mA
0.1mA to 6.000mA for UL544NP
5 Human Body Models IAW UL544 NP, UL544P, UL1563,
UL2601-1, IEC60601-1, IEC 950, UL1950, UL3101 Standards
Leakage, Patient Line Leakage and Patient Auxiliary Leakage.
150799 Rev A3
1count = 10uA
1count = 1uA
1count = 0.1uA
1count = 10uA
1count = 1uA
Accuracy
±(2% + 5cnts)
±(2% + 5cnts)
Page 9 of 177