QuadTech Guardian 6100 Plus Instruction Manual page 140

:RESult
:ALL
HI
LO
ARC
IO
ADV
OVER
ADI OVER
OSC SHORT (DEC) = 103; OSC OPEN (DEC) = 98
:RESult
Page 140 of 177
www.valuetronics.com
:JUDGment?
Command: :SOURce : SAFEty : RESult : ALL : JUDGment?
This command queries all the judgment results. The return format is:
PASS
USER STOP
CAN NOT TEST
TESTING
STOP
HEX and DEC values:
GB MODE
HEX DEC
11 17
12 18
--- ---
--- ---
16 22
17 23
:OMETerage?
Command: :SOURce : SAFEty : RESult : ALL : OMETerage?
This command queries all the voltage (output meter) readings for the step.
:MMETerage?
Command: :SOURce : SAFEty : RESult : ALL : MMETerage?
This command queries all the Measure Meter readings for the step.
:TIME :TEST?
Command: :SOURce : SAFEty : RESult : ALL : TIME : TEST?
This command reads back all step test times including failure times.
:LAST :JUDGment?
Command: :SOURce : SAFEty : RESult : LAST : JUDGment?
This command queries status while testing.
:COMPleted?
Command: :SOURce : SAFEty : RESult : COMPlete?
This command queries if all the test results are completed.
The return format is a "1" or a "0".
:AREPort <Boolean> ON⏐OFF (RS232 Interface only)
Command: :SOURce : SAFEty : RESult : AREPort
This command sets the Automatic Reporting of the test results.
74
71
72
73
70
AC MODE DC MODE
HEX DEC HEX
21 33 31
22 34 32
23 35 33
24 36 34
26 38 36
27 39 37
150799 Rev A3
116
113
114
115
112
IR MODE
DEC HEX
49 41
50 42
51 ---
52 ---
54 46
55 47
DEC
65
66
---
---
70
71
Interface