QuadTech Guardian 6100 Plus Instruction Manual page 152

:GB
:WRANge
:AGC
:NUMber
Page 152 of 177
www.valuetronics.com
:FREQuency <numerical value>
Command: :SOURce : SAFEty : PRESet : GB : FREQuency
This command sets the test frequency for GB Test.
<numeric value> is a value between 50 or 60 and the unit is Hz.
:FREQuency?
Command: :SOURce : SAFEty : PRESet : GB : FREQuency?
This command queries the test frequency for the GB Test.
:AUTO <boolean> ON⏐OFF
Command: :SOURce : SAFEty : PRESet : WRANge : AUTO
This command sets the Auto Range function ON or OFF.
<boolean value> is a "1" or a "0".
:AUTO?
Command: :SOURce : SAFEty : PRESet : WRANge : AUTO?
This command queries the status of the Auto Range function.
The return value is a "1" or a "0".
:SOFTware <boolean> ON⏐OFF
Command: :SOURce : SAFEty : PRESet : AGC : SOFTware
This command sets the software Automatic Gain Control function ON or OFF.
<boolean value> is a "1" or a "0".
:SOFTware?
Command: :SOURce : SAFEty : PRESet : AGC : SOFTware?
This command queries the status of the software Automatic Gain Control
The return value is a "1" or a "0".
:PART <alpha-numeric value>
Command: :SOURce : SAFEty : PRESet : NUMber : PART
This command sets the part number for the device under test.
< alpha-numeric value > is a value of 0-9, A-Z and/or a-z.
:PART?
Command: :SOURce : SAFEty : PRESet : NUMber : PART?
This command queries the part number of the device under test.
:LOT < alpha-numeric value >
Command: :SOURce : SAFEty : PRESet : NUMber : LOT
This command sets the lot number for the device under test.
< alpha-numeric value > is a value of 0-9, A-Z and/or a-z.
:LOT?
Command: :SOURce : SAFEty : PRESet : NUMber : LOT?
This command queries the lot number of the device under test.
150799 Rev A3 Interface