QuadTech Guardian 6100 Plus Instruction Manual page 48

-400 Queue error
-410 Query Interrupted
-420 Query Unterminated
2.4
To access the PROGRAM menu, press [MENU] then press the function key to the right
of the display that corresponds to PROGRAM. In the PROGRAM menu, seven modes
are programmable including Ground Bond (GB), AC Hipot (AC), DC Hipot (DC),
Insulation Resistance (IR), Leakage Current (LC), Pause (PA) and Open/Short Circuit
(OSC). Each of these modes has a number of parameters to set as listed in Table 2-5.
Page 48 of 177
www.valuetronics.com
PROGRAM
Output buffer is out of range
No read command following a query command
No data in queue and device requested to read queue
150799 Rev A3 Operation