QuadTech Guardian 6100 Plus Instruction Manual page 155

5000-01
HV
FRONT
LOW
5000-02
HV
FRONT
LOW
5000-03
FRONT
HV
LOW
5000-04
FRONT
HV
LOW
3.5.2 Scanner Connections
Connection to External Scanners (5000-01 to -04) should be made via the front panel outptut connectors of
The rear panel output connectors of the G6100 Plus are not identical to the front panel output connectors.
The rear panel outptut of the G6100 Plus has a Floating Ground connection ("Ch-3" when programming
Before connecting the scanner to the Guardian 6100 Plus or connecting devices for test,
press the [STOP] key and make sure the red
3-14 illustrate the setup and connection of the G6100 Plus to different scanners.
The G17 25-PIN SCAN control cable is connected from the G6100 Plus rear panel
SCAN connector to the external scanner SCAN I/P connector. Refer to Figure 3-14.
The G18 lead set connects the HV terminals. The white 'Star' plug is connected to the
G6100 Plus front panel HV output terminal and the red banana plug is connected to the
external scanner HV I/P terminal. Refer to Figure 3-14.
The G19 lead set connects the GND terminals. The black banana plug with retaining
bracket is connected to the G6100 Plus front panel GND output terminal and the black
banana plug is connected to the external scanner LOW I/P terminal.
Interconnect the Rear Panel Ground Lugs (Chassis Ground, silver screw/banana plug)
using a banana to banana cable or banana to spade cable. This assures that the scanner(s)
retains connection to earth ground.
Interface
www.valuetronics.com
QuadTech 5000-01 Scanner
1 2 3 4 5 6 7 8
HV ON
6000V DC
4500V AC
MAXIMUM
OUTPUT
!
WARNING
QuadTech 5000-02 Scanner
1 2 3 4 5 6 7 8 HV ON
6000V DC
4500V AC
MAXIMUM
OUTPUT
WARNING
QuadTech 5000-03 Scanner
1 2 3 4 5 6 7
QuadTech 5000-04 Scanner
1 2 3 4 5 6 7
Figure 3-9: 5000-01, -02, -03 & -04 External Scanners
internal scanner). Refer to p52, Figure 2-7.
HV LOW
I/P
O/P
GROUNDING
INPUT
UNKNOWN
HV LOW
DRIVE
I/P
+ -
SENSE
! O/P
HIPOT
!
INPUT
HV LOW
8
HV ON
I/P
!
O/P
WARNING
6000V DC
4500V AC
MAXIMUM
HIPOT
!
INPUT
HV ON HV LOW
8
I/P
!
WARNING
O/P
6000V DC
4500V AC
MAXIMUM
NOTE:
the G6100 Plus instrument.
DANGER
150799 Rev A3
CHANNEL 1 CHANNEL 2 CHANNEL 3 CHANNEL 4 CHANNEL 5 CHANNEL 6
HIPOT
OUTPUT
CH7 CH5 CH3 CH1
CH8 CH6 CH4 CH2
GROUNDING
HIPOT GROUNDING
INPUT
OUTPUT OUTPUT
UNKNOWN
CH4 CH3
CH7 CH5 CH3 CH1
DRIVE
SENSE
+ -
CH8 CH6 CH4 CH2
light is OFF. Figures 3-10 to
Page 155 of 177
SCAN I/F 5000-01
I/P O/P
REAR
SCAN I/F
5000-02
I/P O/P
REAR
SCAN I/F
5000-03
I/P O/P
REAR
Do NOT revers e the
!
Scan INPUT and OUTPUT
SCAN I/F 5000-04
I/P O/P
CH2
CH1
REAR
Do NOT revers e the
!
Scan INPUT and OUTPUT