Xerox DocuColor 250 Online Help Manual page 86

- 68
6. Enter a page range for the exception pages in the [From] and
[To] fields.
NOTE: When creating more than one exception page for a
job, be sure that the page ranges do not conflict. For example,
if you set an exception page on page 12 you cannot enter
page 12 on any other exception pages for that job. If a page
conflict occurs an error dialog window opens notifying you that
an invalid page range was specified. Enter a valid page range
to continue.
7. Choose the Stock tab to select stock characteristics:
• Select a stock from the Name menu. Select [Unspecified]
from the Name menu to set custom stock properties. Make
selections from the Size/Color FAB, Type/Weight FAB, and
if available, Coating FAB.
• You can select a stock and verify the characteristics of the
stock by selecting the [Stock List...], selecting a stock, and
clicking [OK].
• Make selections directly from the Size/Color FAB, Type/
Weight FAB, and if available, Coating FAB. If [Custom] is
selected from the Size menu, within the Size/Color FAB,
the Width and Height fields become active.
NOTE: Be sure the attributes you select are supported on
the printing system.
8. From the Output tab select [1 Sided], or [2 Sided]. If [2 Sided]
is selected, you can choose to [Rotate Side 2].
9. Select the Image Edit tab to set image shift options.
NOTE: The Auto-Center Image Shift option is not available for
exception page programming.
10. Select image quality options. See The Image Quality Tab for
additional information.
11. Select the PostScript/PDF tab and select from:
• Disable Caching
• Enable Caching
• PDL Specified
12. After you have completed setting exception page properties
click [Add Exception].
13. Click [Close] to exit the dialog window. Exception page
information displays on the exception page list and FAB.
Editing an exception page
To edit an exception page:
1. Open Job Manager.
2. Double-click a job in the Active or Inactive Jobs list. You can
P r o du c t N am e B o ok N am e