Xerox DocuColor 250 Online Help Manual page 146
Xerox docucolor 250: reference guide
Hide thumbs
Also See for DocuColor 250:
- User manual (84 pages) ,
- Use manual (2 pages) ,
- Supplementary manual (191 pages)
Advertisement
- 40
ii. The FAB window contains a mimic of a printed page
that reflects the image shift changes you can make.
Select the desired unit of measure: [inches] or [mm]
and select from the following:
–
Independent: Select an independent vertical or
horizontal shift for both sides 1 and 2.
–
Mirror: The horizontal and vertical image shift for both
sides move in opposite directions from each other.
Mirror is best used for two sided jobs.
–
Mirror X only: The horizontal shift for both sides
moves in opposite directions. The vertical shift for both
sides remains independent.
–
Mirror Y only: The vertical shift for both sides moves
in opposite directions. The horizontal shift for both
sides remains independent.
–
Tandem: The horizontal and vertical shift move in the
same direction for both sides.
–
Tandem X only: The horizontal shift for both sides
moves in the same direction. The vertical shift remains
independent for both sides.
–
Tandem Y only: The vertical shift for both sides moves
in the same direction. The horizontal shift remains
independent for both sides. Tandem is best used for
head-to-toe jobs.
iii. Select the desired unit of measure.
iv. Using the X and Y axis, enter a shift value. More
Information...
–
When selecting the horizontal (X) image shift, enter
a positive number to move the image away from
the left side of the paper. Enter a negative number
to move the image away from the right side of the
paper.
–
When selecting the vertical (Y) image shift, enter a
positive number to move the image upward and a
negative number to move the image down.
–
Use the [Reset] option to bring both the X and Y
values back to zero (no shift).
–
Select [Override Y Values], or [Override X Values] if
you want the queue settings to take precedence
over attributes programmed with individual jobs.
Your selections will display on the Image Shift FAB and
within the Summary field.
NOTE: This task list describes the shift behavior on side
one. The shift behavior of side two is determined by the
Shift Option selected.
c.
P r o du c t N am e B o ok N am e
Advertisement
