Xerox DocuColor 250 Online Help Manual page 236

- 12
update host name to IP address mapping.
c. In the Domain Name box, type in the domain that this
device resides in (for example, Xerox.com).
d. In the Hostname box, ensure that this read-only name is
the same as the unique host name that was entered on the
IP Address tab.
e. In the DNS Server list, provide the IP addresses of up to
three DNS servers to search when resolving host names to
IP addresses.
f. In the Domain Search list, provide the names of other
domains to search, if needed, to resolve the host name.
g. Click [Apply] or [OK] to save your settings.
10. If you will be using WINS for NetBIOS name resolution on your
Microsoft network, select the WINS tab.
a. Mark the [Enable WINS] check box to enable it.
b. In the supplied field, type in the IP address of the Primary
WINS Server for resolution of NetBIOS names to IP
addresses on the Microsoft network. If a secondary WINS
server is used, you may also type in the IP address of this
server.
c. Click [Apply] or [OK] to save your settings.
11. If you will be using NIS to distribute password, group, or host
address information on your UNIX network, select the NIS/
NIS+ tab.
a. Select [Enable Name Service].
b. The NIS Plus radio button is enabled by default. If desired,
select the [NIS] radio button instead.
c. Click on the [Find NIS+ Server] check box to query the
network for the name and IP address of the Network
Information Service server.
d. If the NIS+ Server is not found, or the Find NIS+ Server
check box is left unchecked, use the supplied fields to type
in the Domain Name, Server IP address, and Server Name
for NIS/NIS+, if known.
e. Click [Apply] or [OK] to save your settings.
Setting up ADS
To set up ADS:
1. Logon to the DocuSP Controller as a System Administrator.
2. From the DocuSP Setup menu, select [Network
Configuration...].
3. Select the ADS tab.
4. If an ADS domain has been created it is available in the field.
P r o du c t N am e B o ok N am e