Xerox DocuColor 250 Online Help Manual page 50

- 32
• If desired, select [Alternating] to achieve a postcard
imposition.
8. If desired, click [Setup...] to open the Advanced Settings
window.
NOTE: You must be logged on to the controller as 'operator'
or 'System Administrator' to edit the advanced settings.
a. To change the Reduce/Enlarge settings, select the radio
button for Custom underneath Reduce/Enlarge. Auto is the
default, and automatically scales the image(s) depending
upon which layout style you have chosen. Selecting
Custom enables you to scale the image(s) between 1%
and 1000%.
NOTE: Setting custom scaling can produce unexpected or
inappropriate results. For most applications, you should
leave the Auto button selected.
b. Select the checkbox under Margins to adjust them. You
can set margins between 0.01 inches and 2.00 inches.
See Gutter and Outside Margin for more information.
NOTE: If mm is selected under Units, the metric values will
be displayed instead of English values.
c. Set the Trim Size if you wish to leave bleed edges around
your images. You can select the radio button for "Smaller
Than Original Image" to activate the Width and Height spin
boxes. See Bleed/Trim Size and Remove Image Bleed for
more information.
d. If desired, select the pull-down menu for Crop Marks and
select from the following options:
– None: prints no crop marks
– Front
– Back: appears only if Sides Imaged is set to 2
– Both Front and Back: appears only if Sides Imaged is
set to 2
See Crop Marks for more information.
e. If desired, select the units in [mm] or [inches].
f. When all settings have been made, select [OK]. Your
selections will be displayed in the text field.
9. You may also set up a custom layout style, using an existing
layout and including all the specific advanced settings you
have chosen. To set up a custom template:
a. Make all desired settings to your chosen layout style, as in
steps 6-8 above.
b. Select [Save As...]. The Save As User-Defined Template
window opens.
c. Within the Template Name text field, enter a descriptive
P r o du c t N am e B o ok N am e