Xerox DocuColor 250 Online Help Manual page 203

Printer Status/Control window and fault clearance
Printer faults and fault clearance
P r od u c t Na me Bo o k N am e
– Size: Describes the size of the paper in the tray.
– Status: Indicates if the tray is ready for use.
• Stacker: Shows each stacker/finisher and the current
status of each.
2. Click [Close] to exit the Printer Status dialog.
The controller displays all pertinent information related to printer
operation and job status in the Printer Status and Control window.
The information is automatically updated when there is a change
in status.
In the event of a printer processing error, a warning indicator
shows as yellow and an alert or fault shows as red.
When a printer processing error occurs, the printer will fault and
display one or more messages in the Printer Status and Control
field on the DocuSP Print Services window.
A dynamic icon shows the printer configuration and it is located on
the top right corner of the GUI. If your printer configuration
contains more than one standard feeder and/or one finisher, a
module identifier reflects this configuration and is it shown below
the respective module. In the event of a fault, a fault icon will
display above the affected module. Moving the cursor over the
fault icon displays a tool-tip identifying the module and the fault
message. Clicking on a fault icon accesses the fault message
area.
The severity of a fault can be identified by the icon associated with
the fault message.
• A red circle with a white "x" icon indicates a printer fault. The
printer has stopped or is stopping. This fault must be cleared
before printing can resume from the affected area.
• An exclamation point (!) indicates a lower priority fault, such as
low dry ink.
• A wrench indicates a severe problem. Contact the customer
support center.
• A pyramid icon shows the status of each feeder or finisher.
NOTE: For a printer with an Attention Light, a flashing light
indicates a fault requiring immediate attention; a steady light
indicates a fault that can be cleared at a later time.
-3