Xerox DocuColor 250 Online Help Manual page 76

- 58
– Yellow versus Blue
The User TRCs FAB
The User TRCs FAB provides the ability to select and apply user
TRCs that have been created within Color Manager.
To select User TRCs:
1. Open Job Manager.
2. Double-click a job in the Active or Inactive Jobs list.
3. Select the Image Quality tab.
4. Select the User TRCs FAB.
5. From the pull-down menu, select the User TRC you wish to
apply.
6. If desired, select [View Curves...]. The View window opens.
NOTE: You cannot edit TRC curves in this window. You must
edit and create user TRCs within Color Manager. You may,
however, print the TRC curves for future reference.
To print the TRC curves:
a. Click [Print]. The Print window opens.
b. If desired, select the [All] checkbox. Alternatively, you can
select one or more specific curves from the following:
Cyan, Magenta, Yellow, and Black.
c. From the pull-down, select the queue to which the TRC
print job is submitted. The job will be a single-page TIFF.
d. Select [OK]. The job is submitted to the appropriate queue.
7. When you are finished viewing and/or printing the TRC curves,
click [OK]. You are returned to the job properties tabset.
8. Select [OK] to save settings and exit the job properties tabset,
or [Apply] to save settings and continue setting job properties,
or [Cancel] to exit the tabset without saving your edited
settings.
Halftone Screen
Halftone Screen refers to the pattern of dots or lines of varying
sizes applied to an image of varying tones, or same sized dots
applied to a tint of color.
Within the Halftone FAB you will observe a drop-box menu for
halftones. If this drop-box is left alone, the "System Specified"
halftone screen will be applied. However, you may click on this
box to receive further options.
P r o du c t N am e B o ok N am e