Xerox DocuColor 250 Online Help Manual page 142

- 36
You may also set the Text and Graphics Profile differently than
the Images Profile. Within the pull-down are the same options
as listed above.
5. If you wish to use the CMYK Color Space, select the pull-down
menu under that heading for Image. Choose from the
following:
• Commercial CMYK
• DocuColor 2000 CMYK
• DocuColor 6000 CMYK
• DocuColor 8000 CMYK
• FOGRA Gloss Coated CMYK
• FOGRA Matte Coated CMYK
• FOGRA Uncoated CMYK
• SWOP Coated CMYK
• SWOP Plus CMYK
NOTE: You may see different options under this pull-down
menu, depending upon which printer you have.
You may also set the Text and Graphics Profile differently than
the Images Profile. Within the pull-down are the same options
as listed above.
6. If you wish to use the Gray Color Space, select the pull-down
menu under that heading for Images Profile. Choose from the
following:
• DC2000 GRAY
You may also set the Text and Graphics Profile differently than
the Images Profile. Within the pull-down are the same options
as listed above.
7. Select [OK] to save settings and exit the job properties tabset,
or [Apply] to save settings and continue setting job properties,
or [Cancel] to exit the tabset without saving your edited
settings.
Enabling or Disabling
DocuSP honors all PANTONE® colors that are defined in the spot
color table. The PANTONE® colors in PS/PDF files can be
specified by the setcustomcolor operators as well as the
separation and DeviceN color operators. The alternative color
spaces get utilized in case the PANTONE® color is not found in
the spot color table.
You will be able to activate or deactivate the PANTONE® color
path. When the PANTONE® color path is disabled, the alternative
color space will be used instead of PANTONE® colors.
As an example of why this feature can be valuable, consider the
following scenario: A user may wish to print a document that
Processing
PANTONE®
P r o du c t N am e B o ok N am e