Xerox DocuColor 250 Online Help Manual page 316

- 16
applied.
• Remove Image Bleed
• More Information...
• When bleed and trim size are programmed for signature-
style layouts (Booklet and Perfect Booklet), there will be
the ability to specify the amount of image bleed to remove
along the center fold line of the signature output sheet. The
user will be given two options on how to deal with the
bleed along the fold line (bleed mode); they can select
Bleed to Fold or set a custom bleed amount. When Bleed
to Fold is selected, the entire bleed area will be removed
from the right edge of the left-hand image and the entire
bleed area will be removed from the left edge of the right-
hand image, along the center fold line. This will have the
effect of bringing the two image trim boxes flush with each
other along the fold. If custom bleed is selected, there user
can specify manually the amount of bleed area to be
removed from each image along the center fold line, in
effect moving each of the trim boxes inwards towards the
fold line by the specified amount. Important to note is that,
like gutter, the custom bleed amount is relative to the
unscaled original document size. Bleed for signature jobs
and gutters are mutually exclusive. If bleed is selected,
gutter will not be programmable. Signature shift, on the
other hand, still will selectable.
How do I change stitch/staple placement?
To change the stitch/staple placement:
1. Open the Job Manager.
2. Double-click the job you wish to edit. The Job Properties
window opens.
3. Select the Output tab.
4. Select the Basic Settings FAB.
5. Select the Stapling/Finishing FAB.
6. Select a stapling option from the Stapling/Finishing menu.
7. Select the [Staple Placement...] button. The Staple dialog
opens.
a. If desired, edit the staple placement using the spin box or
the "sizing handle" next to the paper mimic. The paper
mimic changes to reflect the changed settings.
b. Select the proper stock size from the Stock Size pull-down
menu. This will determine the scope of the staple
placement change.
c. If desired, select enable or disable for subset finishing. If
enable is selected, you will be able to change the page
boundary using the spin box that appears.
P r o du c t N am e B o ok N am e