Xerox DocuColor 250 Online Help Manual page 312

Job layout and finishing
- 12
NOTE: IPDS jobs will not stream/RIP and other non-IPDS jobs in
the system will stop processing when an IPDS job is sent to a
Paused DocuSP system.
How do I pause and resume a printer?
Available pause options depend on printer configuration. To pause
and resume a job:
1. From the Content menu, located in the upper right corner of
the GUI, select [Pause], [Pause Scanning] or [Pause Printing].
2. To resume the printing or scanning process select [Resume],
[Resume Scanning] or [Resume Printing].
NOTE: IPDS jobs will not stream/RIP and other non-IPDS jobs in
the system will stop processing when an IPDS job is sent to a
Paused DocuSP system.
DocuSP provides you with many job layout and finishing options.
Using these options, you can achieve your desired print outputs.
How do I print a job in reverse order?
Output order determines the order in which the printed pages are
delivered to an output device, either first to last or last to first.
To print a job in reverse order:
1. Open Job Manager.
2. Double-click a job in the Active or Inactive Jobs list.
3. Select the Output tab.
4. Select the Stapling/Finishing FAB.
5. From the Output Order menu select from.
• System Specified: Allows the system to determine the
most appropriate order for the given job.
• 1 - N (Ascending): Printed pages are delivered first to last
with the last page on top.
• N - 1 (Descending): Printed pages are delivered last to
first with the first page on top.
How do I print a job head-to-toe?
To print a job head-to-toe:
1. Open the Job Manager.
2. Double-click the job you wish to edit. The Job Properties
window opens.
P r o du c t N am e B o ok N am e