Xerox DocuColor 250 Online Help Manual page 26

- 8
• Saving a job
Releasing a single job to print
You can release a job for printing from the Current tab, or if the
Retain PDL option is enabled you can release jobs from the
Completed tab. See Multiple job submission if you want to submit
more than one job for printing.
To release a single job to print:
1. Open Job Manager.
2. Select a job and perform one of the following:
• Right-click the job and select [Release] from the menu.
• From the Job pull-down menu select [Release].
• Select the [Release] icon from the toolbar.
Multiple job submission
DocuSP allows you to submit and print multiple jobs. You can
perform Print, Proof, and Print Now options.
NOTE: While there is no hard limit to the amount of jobs that you
can submit, performance may be impacted if you submit hundreds
of jobs.
To submit and print multiple jobs:
1. Open the Job Manager.
2. If desired, select the queue that you want to use to print the
selected jobs from the For Queue menu.
3. Select multiple jobs by performing one of the following:
• Press and hold down the <CTRL> (Control) key and select
each individual job.
• To select multiple files that are adjacent to one another,
press and hold down the <SHIFT> key while choosing the
first and last file names you want to select. This highlights
the first and last file name lines and all lines in between.
4. Right-click within the selected jobs and choose from the
following:
• Release: Prints the selected jobs.
• Proof: Prints one copy of each job and retains the jobs in
the queue for additional printing. Proof jobs interrupt any
currently printing job.
• Print Now: Interrupts any currently printing jobs to print the
selected jobs.
P r o du c t N am e B o ok N am e